Special Binder
specially developed binder
Rethinking loose-fill insulation: What is the ThermoWhite® system?
Rethink Insulation - with the ThermoWhite® system
ThermoWhite® is an insulation system based on mineral-bound loose-fill insulation made from recycled EPS - innovative, CE-certified, and versatile.
ThermoWhite® provides a dimensionally stable, closed insulation layer that significantly improves thermal insulation and impact sound performance. Compared to many conventional systems, the ThermoWhite® system delivers consistent stability with high load-bearing capacity.
Together with selected partner companies, this creates a combination of high product quality, reliable system build-up, and professional service.
The system's verified quality is based on several factors:
Innovative Technology
Precise, seamless installation using state-of-the-art MixMobil technology.
Recycled Granulate
high-quality EPS granulate made from recycled material
Continuous Monitoring
controlled processing with in-house production control and independent internal and external monitoring
Sustainability of the ThermoWhite® System
The ThermoWhite® insulation system based on mineral-bound loose-fill insulation is an eco-friendly alternative to many conventional insulation board systems.
The system relies on natural mineral raw materials and recycled polystyrene (EPS), proving that performance and resource conservation can go hand in hand.
Sustainability is an integral part of the ThermoWhite® system - not just an additional argument.
- Use of recycled polystyrene (EPS)
- Use of natural mineral raw materials
- Positive environmental balance, confirmed by a study from the Institute of Waste Management at the University of Natural Resources and Life Sciences, Vienna
- Awarded the ENERGY GLOBE AWARD 2019
With seamless installation of our loose-fill insulation, the labor-intensive cutting of boards is eliminated. This reduces offcuts, saves material, and keeps construction sites cleaner. With every project, we and our partners contribute to more resource-efficient construction.
A study by the Institute of Waste Management at the University of Natural Resources and Life Sciences, Vienna confirms ThermoWhite® has a positive environmental balance and high environmental compatibility. Compared with conventional EPS board insulation systems, the following is evident:
Sustainability Dashboard
75%
Ozone Reduction
54%
Energy Savings
21%
CO2 Reduction
3%
Turn Reduction
14%
Water Conservation
12%
Resource Protection
100%
Recycling Guarantee
Comparison of insulation values with ThermoWhite® insulation in theory and practice
Installation with ThermoWhite®
(0.049 W/mK)
PRACTICE U-value: 0.818
ThermoWhite® surrounds the pipes and completely fills slots and gaps. This avoids thermal bridges and cold bridges. As a result, the calculated U-value is significantly better in real-world practice.
Installation of EPS insulation boards
(0.038 W/mK)
PRACTICE U-value: 0.988
EPS insulation boards are more labor-intensive to install around pipes in the slab installation layer. Remaining gaps often cause the U-value in practice to perform worse than expected on paper.
Fast and clean: On-site installation
Perfect insulation in six work steps:
Just-in-time production with MixMobil
No storage space required, no waste: Our computer-controlled MixMobil produces ThermoWhite® loose-fill insulation directly at your doorstep. This ensures certified material quality and maximum cleanliness on site, because only what is actually needed is processed.
Seamless enclosure of all installations
No more labor-intensive board cutting. The liquid loose-fill insulation is pumped in directly via hoses and encloses all service lines completely without joints. This eliminates thermal, cold, and sound bridges from the very first step and creates a perfectly insulated base.
Perfect leveling via reference line
Precision is our standard. The insulation fill is distributed exactly according to the specified reference line and mechanically compacted. This creates a perfectly level surface that remains dimensionally stable even at extreme installation heights and forms the basis for all subsequent trades.
Homogeneous structure for maximum load capacity
After a short time, ThermoWhite® insulation is ready for walking and forms a stable body. This unit of mineral-bound recycled EPS delivers outstanding impact sound insulation values of up to 32 dB and sustainably high compressive strength.
Faster progress for follow-on trades
On the level ThermoWhite® surface, system foils and underfloor heating can be installed much more efficiently than on uneven board layers. Thanks to our "Speed Up" component, the system is ready for the next phase after just 12 to 24 hours - a major time advantage!
Sustainable base for your final floor
Whether screed, parquet, or tiles: The ThermoWhite® system ensures a durable and energy-efficient floor build-up. You benefit from a system that is recyclable, does not need to be disposed of later as hazardous waste, and sustainably lowers building operating costs through excellent lambda values.
This is how the ThermoWhite® system combines high execution quality with an efficient and clean construction process.
Contact usCertificates & verified quality
ThermoWhite® products comply with strict European quality standards.
The tests relate to the respective products and system assemblies. Danish requirements and the applicable product version must be checked for each project.
Quality assurance tests according to the required standards:
- Tests according to ETA-17/0407, ETA-12/0428, ETA-17/0408, and ETA-19/0772
- EPS grain group ÖNORM - EN 933-1
- Bulk density of EPS dry mortar ÖNORM - EN 1097-3
- Fresh mortar density ÖNORM - EN 12350-6
- Thermal conductivity ÖNORM - EN 12667, ÖNORM B 6015-1 and -2
- Dry density ÖNORM - EN 1602
- Compressive stress at 10% deformation ÖNORM - EN 826
- Creep behavior ÖNORM - EN 1606
- Deformation under defined pressure and temperature load ÖNORM - EN 1605
- Fire behavior ÖNORM - EN 13501-1
- Dynamic stiffness ÖNORM - EN 29052-1
The advantages of the ThermoWhite® system
The ThermoWhite® system delivers tested insulation performance, sustainable materials, and quality made in Austria.
Areas of application
ThermoWhite® is highly versatile for new builds and renovations - from roof to floor.
Maximum energy efficiency beneath the roof. ThermoWhite® provides seamless insulation between the rafters without offcuts. The mineral-bound loose-fill insulation adapts precisely to any roof structure and effectively prevents thermal bridges. Benefit: excellent insulation performance and lasting dimensional stability.
Custom-gradient insulation. ThermoWhite® can be installed to the exact slope required for flat roofs. Because the material is applied seamlessly, it provides a stable, highly insulating base for the waterproofing layer. Benefit: fast installation and a precise fit around drains and structural elements.
A fast solution for renovating older homes. ThermoWhite® is ideal for uneven existing floors and fills cavities in timber joist ceilings cleanly and efficiently. Benefit: a tidy site thanks to MixMobil hose delivery and an immediate improvement in energy performance.
The perfect base for comfortable warmth. ThermoWhite® surrounds pipes and electrical installations without voids and improves impact sound insulation by up to 32 dB. Benefit: with Speed Up, depending on the system, the next layer can be installed after approximately 12 hours for exceptionally fast construction progress.
Enjoy your pool at an ideal temperature for longer. Our water-resistant insulation fill provides excellent thermal insulation against the surrounding ground. Benefit: a form-fitting backfill that protects the pool shell and helps keep the water temperature stable.
A solid base for your pool project. A pool base made with ThermoWhite® WD 130 R combines high compressive strength with outstanding insulation performance. Benefit: fast installation and a warmer pool floor for maximum comfort.
Form-fitting insulation for historic structures. ThermoWhite® follows every curve of uneven vaulted ceilings without adding excessive dead load. Benefit: structurally advantageous, void-free, and ideally suited to heritage conservation.
EPD · MD-23094-DA
Documented environmental impacts
The Danish Environmental Product Declaration provides life-cycle data for the documented ThermoWhite® products.
EPD MD-23094-DA_rev1 covers WD70, WD100 and WD130. It supports planning and documentation with environmental impact information within the declared scope.
Open the Danish EPD (PDF)
- Declared products
- WD70 · WD100 · WD130
- Revision
- 5 April 2024
- Stated validity
- until 29 September 2028
An EPD describes environmental impacts. Technical properties and a specific application also require the applicable product version and current product and installation documents. The linked original is in Danish.
Evidence for your project in Denmark
Product version, system assembly and application conditions belong together. We help you identify the relevant documents.
Product-specific evidence
ETAs, declarations of performance and data sheets apply to the documented product version and installation conditions.
Controlled installation
The appropriate mixture, installation thickness and subsequent layers form part of the planned system assembly.
Danish environmental declaration
EPD MD-23094-DA_rev1 documents WD70, WD100 and WD130. Revised 5 April 2024, with stated validity until 29 September 2028.
Does every document apply to every product?
No. Product identity, version and installation conditions must match the document. The Danish EPD is not a blanket approval of the entire catalogue.
Which values apply to my floor assembly?
The appropriate current product version, planned thickness and complete system assembly determine the applicable values. Differences in older documents require technical clarification before any commitment.
Is funding guaranteed?
There is no blanket funding commitment. Market-specific and project-specific requirements must be checked separately.
Certified Quality
Certified Quality
ThermoWhite® products meet strict European quality standards and are certified for the highest requirements.
ÖNORM EN 13163CE markingETA approval